New Items

Product Details:

Machinery parts of high tensile steel, parts of earthmoving equipment. Repairs of case-harding steel parts after removing the hard zone.

Additional Information:

• Item Code: E10016G

Product Details:

A Stainless steel electrode depositing 19Cr-10Ni stainless steel weld metal with carbon in the range of 0.04-0.08.

Additional Information:

• Item Code: E308H16

Product Details:

Welding AISI 309cb type, straight chrome steels, joining stainless steel to low alloy steels and carbon steels.

Additional Information:

• Item Code: E309CB16

Product Details:

Designed for ease of use, exceptional weld bead appearance, and high weld metal integrity, primarily in the down hand and H-V welding positions.

Additional Information:

• Item Code: E31817

Product Details:

Duited to vertical and overhead welding applications including fixed pipework. Low hydrogen manufacturing technology ensures high resistance to weld metal porosity.

Additional Information:

• Item Code: E317L16

Product Details:

Designed for ease of use, exceptional weld bead appearance and high weld metal integrity, primarily in the downhand and HV positions.

Additional Information:

• Item Code: E309L17

Product Details:

Rutile metal powder MMA electrode made on pure low carbon core wire.
Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E41026

Product Details:

To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E309L15

Product Details:

Welding of ASTM A-515Gr-55 and ASTM 516Gr.55 pressure vessel steels subjected to intermediate and lower temp applications.

Additional Information:

• Item Code: E7016G

Product Details:

Welding of duplex stainless steels.To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E220917

Product Details:

To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E31616

Product Details:

To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E31816

Product Details:

Welding of duplex stainless steel, e.g.UNS S31803. Particularly suitable for  welding duplex pipes in offshore applications.

Additional Information:

• Item Code: E220915

Product Details:

To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E318L16

Product Details:

For joining straight chromium stainless steels.To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E41015

Product Details:

MMA Electrode with basic carbonate-fluoride flux on high purity 304L corewire. Designed to give good moisture resistance and hence freedom from weld porosity.

Additional Information:

• Item Code: E34715

Product Details:

Suited for LNTo cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precTo cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basicTo cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parametersisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parametersG applications.

Additional Information:

• Item Code: E308L15

Product Details:

Welding of duplex stainless steels.To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E220916

Product Details:

Low alloy steel boilers and pipings operating at service temperatures upto 6000c in oil refinery,  thermal and chemical plants.

Additional Information:

• Item Code: E9018B3

Product Details:

Designed for welding steel of the 18Cr12Ni3Mo type.To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E316L15

Product Details:

Welding 5% cr-0.5% mo steels in the form of pipes and tubes which are used in chemical industries, oil refineries and mining plants.

Additional Information:

• Item Code: E50215

Product Details:

Welding 2. 5% nickel steels, high tensile alloys steels, boilers, pressure vessels, pipelines for liquid gases, storage tanks ets and steels of greades a 203, a33, a 350

Additional Information:

• Item Code: E8018C1

Product Details:

ELWI 330H-16 is a higher carbon version of AWS 330-16 type yielding a weld metal containing 0.4C for welding and repair of alloy castings and wrought alloys.

Additional Information:

• Item Code: E330H16

Product Details:

Suited for joining/welding of dissimilar steels, cast steels nickel steels, chrome steels etc.,

Additional Information:

• Item Code: E31216

Product Details:

ELWI NIFE CL A is a versatile electrode with Nicke-Ferrous alloy core wire designed for producing a high strength, ductile, machinable, weld-matches colour of the base metal.

Additional Information:

• Item Code: ENIFECLA

Product Details:

The electrode is ideal for welding machine bases, engine blocks, gears, & Pumps, Joining of broken cast iron parts & for repairing defects in foundry castings.

Additional Information:

• Item Code: ENICUB

Product Details:

Designed for ease of use, exceptional weld bead appearance, and high weld metal integrity, primarily in the down hand and HV welding positions.

Additional Information:

• Item Code: E316L17

Product Details:

Designed to give moisture resistance and hence from weld porosity.
To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E309MO15

Product Details:

Used for materials with a minimum tensile strength requirement of 62Kg/mm2 i.e AISI 4130, ASTL A487 grades 2A, B & C(Cast).

Additional Information:

• Item Code: E9018D1

Product Details:

The parts that can be welded/surfaced are machine parts & tools, oil expeller worms,plough shares, dredger buckets & cutters, excavator teeth, conveyors & buckets.

Additional Information:

• Item Code: EHARDVLH

Product Details:

To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E410NiMo

Product Details:

Welding high tensile steels. Specially recommended for weathering steels like CORTEN A and B and their equivalents.

Additional Information:

• Item Code: E8018W2

Product Details:

Used for welding 1% nickel steels, high tensile alloy steels, boilers, pressure vessels, pipe lines and storage tanks.

Additional Information:

• Item Code: E8018GH4R

Product Details:

Welding of low alloy steels with mo as alloying elements and heat resistance upto 5500c. Also suitable for light repairs.

Additional Information:

• Item Code: E8013G

Product Details:

Welding of structures, bridges, boilers, pipe lines, grills, automobile bodies, automobile parts, machinery fabrication, steel furniture, railway coaches and wagons, ships, tugs, barges, trawlers, dredgers, storage tanks, etc.

Additional Information:

• Item Code: E6012

Product Details:

Suitable for welding modified 9% cr/mo 0.2%v creep resisting steels. Used mainly by the power engineering industry of headers, stream piping ad turbine rotors.

Additional Information:

• Item Code: E9018B9

Product Details:

Welding carbon molybdendum steels,medium and high tensile alloys steels, heat and creep resisting steels, boilers, pressure vessels, pipelines, heavy strutural work, bridges, chemical storage tanks etc.,

Additional Information:

• Item Code: E7018A1

Product Details:

Red Oxide Metal Primer is a highly durable, water based Cement Primer.

DIRECTIONS TO USE:Number One Red Oxide Metal Primer can be applied by brush, roller or spray.
SURFACE PREPARATION:
Ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking Paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required.Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used uiherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

THINNINGThin 1 Litre of Number One Cement Primer with maximum of 500ml water.

PRIMINGIn case of freshly plastered walls, apply 1 coat of Number One Cement Primer after thinning with water in the ratio of 1 : 0.5 by volume. For better performance Number One Paints Cement Primer is recommended.

FINISHINGApply 2 coats of Number One Premium Emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.
Ease of Application
HEALTH. SAFETY AND ENVIRONMENTAL SECURITYStore in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed.Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label.Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; Refer to special instructions/Safety data sheet.

Product Details:

Applications include welding Stainless Steel, galvanized steel, low alloy steel, structural steel, strutural work such as buildings and bridges, pressure vessel fittings, storage tanks etc. , 

Product Details:

Welding high tensile low alloy steels, nickel steels, nickel molybdenum steels, fillet and attachment welds in t-1, hy-80, hy-90 steels, quenched and tempered steels.

Additional Information:

• Item Code: E9018M

Product Details:

Welding of C-Mn grain refined steels, Heavy sections, restrained joints requiring good impact strength at sub-zerotemp down to minus 50^oc.

Additional Information:

• Item Code: E7018G

Product Details:

Acid rutile electrode made on nearly matching austeniti steel core wire.

Additional Information:

• Item Code: E309MOL17

Product Details:

Electrode for welding of Cu and Cu-alloys, cast iron and also joining them with steel.

Additional Information:

• Item Code: ECUSNC

Product Details:

ENAMEL THINNER

Number One Paints Enamel Thinner for synthetic enamel is specially formulated for use with general purpose enamel and undercoats to get optimum results. It can also be used with any standard formulations of general purpose industrial paint.
Use enamel thinner for synthetic enamel thinner for quick setting finish with excellent flow and gloss. For easy application, the recommended thinning ratio is depending on the products & application viscosity of paints.

Nett 1 Liter
SAFETY. SECURITY. HEALTH & ENVIRONMENTAL INFORMATION
Keep away from childrenKeep container tightly closed when not in use. Keep thinner away from sources of ignition. A vapour mask should be worn when using this product at all times. In case of contact with eyes rinse with plenty of water and seek medical advice, if required. Remove splashes from skin with soap and water or a recognized skin cleanser, in case of ingestion, immediately seek medical attention. Do not pour leftover thinner into drains. Seal and keep for disposal

Product Details:

ELWI NICU 7 is used for Shielded-metal-arc welding of monel alloys 400, R-405 and K-500.

Additional Information:

• Item Code: ENICU7

Product Details:

Basic low hydrogen metal powder MMA electrode made on pure low carbon core wire.

Additional Information:

• Item Code: E41025

Product Details:

Designed for cold welding of cast irons such as grey cast iron, melleable cast irons

Additional Information:

• Item Code: ENICL

Product Details:

Suited for joining/Welding of dissimilar steels, cast steels nickel steels, chrome steels etc.,

Additional Information:

• Item Code: E32015

Product Details:

All positional fixed pipework welding with the 2.5/3.2mm diameter electrodes.

Additional Information:

• Item Code: E34716

Product Details:

Cellulose coated electrode for vertical down pipe welding higher strength pipe steels.

Additional Information:

• Item Code: E8010P1

Product Details:

MMA electrode with acid rutile flux on matching 312 stainless steel core wire.

Additional Information:

• Item Code: E31217

Product Details:

Acid rutile electrode made on nearly matching austenitic steel core wire.

Additional Information:

• Item Code: E309MO17

Product Details:

Designed for ease of use, exceptional weld bead appearance, and high weld metal integrity, primarily in the down hand and HV welding positions.

Product Details:

4846 and 4848, cladding side of stainless clad steels, straight chroma steels and dissimilar steels.

Additional Information:

• Item Code: E31015

Product Details:

For welding hign tensile steels, such as usst-1, hoag n-a-xtra 65, n-a-xtra 70, bh65.

Additional Information:

• Item Code: E10018M

Product Details:

Used for the welding of steels with a low yield to tensile strength ratio.

Additional Information:

• Item Code: E11018G

Elwi-6010 plus has wide applications and the most important is its use in joining pipe lines, where the electrode is operated in all welding positions.

Additional Information:

• Item Code: E6010PLUS

Water Based Cement Primer Interior is a highly durable, water based Cement Primer.

DIRECTIONS TO USE:Number One Cement Primer can be applied by brush, roller or spray.
SURFACE PREPARATION:
Ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking Paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required.Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used uiherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

THINNINGThin 1 Litre of Number One Cement Primer with maximum of 500ml water.

PRIMINGIn case of freshly plastered walls, apply 1 coat of Number One Cement Primer after thinning with water in the ratio of 1 : 0.5 by volume. For better performance Number One Paints Cement Primer is recommended.

FINISHINGApply 2 coats of Number One Premium Emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.
Ease of Application
HEALTH. SAFETY AND ENVIRONMENTAL SECURITYStore in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed.Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label.Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; Refer to special instructions/Safety data sheet.

Wall Primer Interior is a highly durable, water based Cement Primer.

DIRECTIONS TO USE:Number One Wall Primer Interior can be applied by brush, roller or spray.
SURFACE PREPARATION:
Ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking Paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required.Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used uiherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

THINNINGThin 1 Litre of Number One Cement Primer with maximum of 500ml water.

PRIMINGIn case of freshly plastered walls, apply 1 coat of Number One Cement Primer after thinning with water in the ratio of 1 : 0.5 by volume. For better performance Number One Paints Cement Primer is recommended.

FINISHINGApply 2 coats of Number One Premium Emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.
Ease of Application
HEALTH. SAFETY AND ENVIRONMENTAL SECURITYStore in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed.Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label.Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; Refer to special instructions/Safety data sheet.

Cut Off WHEELS: Cut Off Wheels are commonly used in weld shops, fabrication industries, metal working industries and foundry divisions for re-burring, grinding, polishing and finishing.

Product Details:

Abrasive Metal Grinding Wheels: Abrasive Metal Grinding Wheels are commonly used in weld shops, fabrication industries, metal working industries and foundry divisions for re-burring, grinding, polishing and finishing.

Abrasive Wheels: Abrasice Wheels are commonly used in weld shops, fabrication industries, metal working industries and foundry divisions for re-burring, grinding, polishing and finishing.

Product Details:

Industrial thinner

number one paints enamel thinner for synthetic enamel is specially formulated for use with general purpose enamel and undercoats to get optimum results. It can also be used with any standard formulations of general purpose industrial paint.
use enamel thinner for synthetic enamel thinner for quick setting finish with excellent flow and gloss. For easy application, the recommended thinning ratio is depending on the products application viscosity of paints.

nett 1 liter
safety. Security. Health environmental information
keep away from childrenkeep container tightly closed when not in use. Keep thinner away from sources of ignition. A vapour mask should be worn when using this product at all times. In case of contact with eyes rinse with plenty of water and seek medical advice, if required. Remove splashes from skin with soap and water or a recognized skin cleanser, in case of ingestion, immediately seek medical attention. Do not pour leftover thinner into drains. Seal and keep for disposal

CUTTING WHEELS: CUTTING Wheels are used For cutting and designed to cut all types of Steels and various alloys. Advanced and clean resin bond provides quick cutting action with minimal kerf loss.

GRINDING WHEELS: Grinding Wheels are commonly used in weld shops, fabrication industries, metal working industries and foundry divisions for re-burring, grinding, polishing and finishing.



 

Additional Information:

• Minimum Order Quantity: 1000 Inch

Product Details:

Emulsion based primer is a highly durable, water based cement primer.

directions to use:number one emulsion based primer can be applied by brush, roller or spray.
surface preparation:
ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required. Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used uiherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

thinningthin 1 litre of number one cement primer with maximum of 500ml water.

primingin case of freshly plastered walls, apply 1 coat of number one cement primer after thinning with water in the ratio of 1 : 0. 5 by volume. For better performance number one paints cement primer is recommended.

finishingapply 2 coats of number one premium emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.
ease of application
health. Safety and environmental securitystore in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed. Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label. Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; refer to special instructions/safety data sheet. request

Product Details:

Putty powder
application details

german technology coverage:-1. 2 kg powder / m2 / mm thickness. One bag of 40 kg covers approx. 200-220 sft in 2 coats for maximum thickness of 1. 5 mm depending on the surface level.

substrate quality:-
the substrate should be free from grease, oil and loosely adhering particles. substrate preparation:-
clean the surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quantity of clean water. There should not be any mildew or algae on the surface.
application method:-
first mix the supplied number one wall care putty with recommended water (14 litre), by weight of powder as printed on the packaging. Continue mixing until a homogeneous lump free paste of desired consistency is obtained. Apply 1st coat of number one wall care putty uniformly on already moistened surface with the help od putty blade or trowel. Mix only that quantity which can be applied within workable time. After surface drying of the 1 st coat apply 2nd coat with fresh material. The total thickness of 2 coats should be maximum 1,5mm. Uneven thickness due to unskilled application may cause problem. After complete drying and hardening, the surface should be prepared with fine waterproof emery paper before painting. Finishing should be done by skilled pop applicators.

Product Details:

White cement putty
application details

german technology coverage:-1. 2 kg powder / m2 / mm thickness. One bag of 40 kg covers approx. 200-220 sft in 2 coats for maximum thickness of 1. 5 mm depending on the surface level.

substrate quality:-
the substrate should be free from grease, oil and loosely adhering particles. substrate preparation:-
clean the surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quantity of clean water. There should not be any mildew or algae on the surface.
application method:-
first mix the supplied number one wall care putty with recommended water (14 litre), by weight of powder as printed on the packaging. Continue mixing until a homogeneous lump free paste of desired consistency is obtained. Apply 1st coat of number one wall care putty uniformly on already moistened surface with the help od putty blade or trowel. Mix only that quantity which can be applied within workable time. After surface drying of the 1 st coat apply 2nd coat with fresh material. The total thickness of 2 coats should be maximum 1,5mm. Uneven thickness due to unskilled application may cause problem. After complete drying and hardening, the surface should be prepared with fine waterproof emery paper before painting. Finishing should be done by skilled pop applicators.

Keeping track with the latest market development we are actively engaged in offering supreme quality of Water Resistant Wall Putty

Product Details:

To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E10UM60GR

Product Details:

To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E10UM55GPR

Product Details:

Valve seats of combustion engines, Hot shear blades, Tongs, Wire mill rolls, Knives, Conveyor screws, Mixer blades, Milling cutters, Drills.

Additional Information:

• Item Code: ECOCRA

Product Details:

To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E6UM55G

Product Details:

To cater the variegated demands of our prestigious clients, we are the prominent supplier to offer a wide range of product to our clients. Our offered product is precisely designed and using the best grade basic material and modern technology. The provided product is highly appreciated by our clients owing to its optimum strength and durability. Furthermore, to avoid any flaws, the offered product is tested by our quality controllers on various quality parameters

Additional Information:

• Item Code: E1UM300

Product Details:

Rotating Fans of Boilers, Roller mill guides, Steam turbine parts, valve seats, extrusion dies and mixer blades.

Additional Information:

• Item Code: ECOCRC

Product Details:

Structural welding of medium to heavy mild steel structures, construction and erection of boilers, pressure vessels, wagons, girders, tanks, ships, brages, coaches, etc.

Additional Information:

• Item Code: E7014

Product Details:

Designed for ease of use, exceptional weld bead appearance and high weld metal integrity, primarily in the down hand and HV welding positions.

Additional Information:

• Item Code: E308L17

Product Details:

Welding 1% nickel steels, high tensile alloy steels, boilers, pressure vessels,pipe lines and storage gases ehre the temp, requirement is upto minues 600c

Additional Information:

• Item Code: E8018C3

Product Details:

Welding of structures, highly restrained joints, bridges, railway coaches & wagons, plants, ships, tugs, barges, trawlers, dredgers, storage tanks, boilers, piplines, grills.

Additional Information:

• Item Code: E7015

Product Details:

Low alloy steels such as si-min steels & steels containing ni upto 1.0%. For medium tensile steels like bh39, bh47, bhw27, aidur 45/60 etc.

Additional Information:

• Item Code: E8018G

Product Details:

Elwi-7010 is recommended for welding api grades x42, x46, x52 and x56 pipe and the root pass upto api grade x70.

Additional Information:

• Item Code: E7010

Product Details:

For welding low alloy, high strength fully killed fine grained steels having a tensile strength of above 70kgf/mm2 penstocks.

Additional Information:

• Item Code: E10018D2

Product Details:

1. Welding high tensile steels with uts upto 70kg/cm2.
2. Welding grain refined q&t steels.
3. Fabrication of penstocks, tanks, pressure vessels etc.,

Additional Information:

• Item Code: E9018G

Product Details:

Suited for welding, 25/20 stainless steels, clad steels, stainless steel to dissimilar steels, such as chromium steels, carbon-molybdenum steels, 309, 310s, 410, 430steels

Additional Information:

• Item Code: E31016

Product Details:

Suitable for welding high strength martenisitic stainless steels having better resistance to corrosion, hydro-cavitation.

Additional Information:

• Item Code: E43015

Product Details:

Applications include welding mild steel, galvanized steel, low alloy steel, structural steel, strutural work such as buildings and bridges, pressure vessel fittings, storage tanks etc. ,

Additional Information:

• Item Code: E6011

Product Details:

Welding api grades x42, x46, x52 and x56 pipe and the root pass upto API grade x70.

Additional Information:

• Item Code: E7011

Product Details:

Welding api grades x42, x46, x52 and x56 pipe and the root pass upto api grade x70.

Additional Information:

• Item Code: E7010G

Product Details:

Cellulose coated electrode for vertical down pipe welding higher strength pipe steels.

Additional Information:

• Item Code: E8010G