PAINTS

Product Details:

Emulsion based primer is a highly durable, water based cement primer.

directions to use:number one emulsion based primer can be applied by brush, roller or spray.
surface preparation:
ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required. Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used uiherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

thinningthin 1 litre of number one cement primer with maximum of 500ml water.

primingin case of freshly plastered walls, apply 1 coat of number one cement primer after thinning with water in the ratio of 1 : 0. 5 by volume. For better performance number one paints cement primer is recommended.

finishingapply 2 coats of number one premium emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.
ease of application
health. Safety and environmental securitystore in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed. Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label. Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; refer to special instructions/safety data sheet. request

Product Details:

White cement putty
application details

german technology coverage:-1. 2 kg powder / m2 / mm thickness. One bag of 40 kg covers approx. 200-220 sft in 2 coats for maximum thickness of 1. 5 mm depending on the surface level.

substrate quality:-
the substrate should be free from grease, oil and loosely adhering particles. substrate preparation:-
clean the surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quantity of clean water. There should not be any mildew or algae on the surface.
application method:-
first mix the supplied number one wall care putty with recommended water (14 litre), by weight of powder as printed on the packaging. Continue mixing until a homogeneous lump free paste of desired consistency is obtained. Apply 1st coat of number one wall care putty uniformly on already moistened surface with the help od putty blade or trowel. Mix only that quantity which can be applied within workable time. After surface drying of the 1 st coat apply 2nd coat with fresh material. The total thickness of 2 coats should be maximum 1,5mm. Uneven thickness due to unskilled application may cause problem. After complete drying and hardening, the surface should be prepared with fine waterproof emery paper before painting. Finishing should be done by skilled pop applicators.

Keeping track with the latest market development we are actively engaged in offering supreme quality of Water Resistant Wall Putty

Product Details:

Putty powder
application details

german technology coverage:-1. 2 kg powder / m2 / mm thickness. One bag of 40 kg covers approx. 200-220 sft in 2 coats for maximum thickness of 1. 5 mm depending on the surface level.

substrate quality:-
the substrate should be free from grease, oil and loosely adhering particles. substrate preparation:-
clean the surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quantity of clean water. There should not be any mildew or algae on the surface.
application method:-
first mix the supplied number one wall care putty with recommended water (14 litre), by weight of powder as printed on the packaging. Continue mixing until a homogeneous lump free paste of desired consistency is obtained. Apply 1st coat of number one wall care putty uniformly on already moistened surface with the help od putty blade or trowel. Mix only that quantity which can be applied within workable time. After surface drying of the 1 st coat apply 2nd coat with fresh material. The total thickness of 2 coats should be maximum 1,5mm. Uneven thickness due to unskilled application may cause problem. After complete drying and hardening, the surface should be prepared with fine waterproof emery paper before painting. Finishing should be done by skilled pop applicators.

Product Details:

Water primer exterior is a highly durable, water based cement primer.

directions to use:number one cement primer can be applied by brush, roller or spray.
surface preparation:
ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required. Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used uiherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

thinningthin 1 litre of number one cement primer with maximum of 500ml water.

primingin case of freshly plastered walls, apply 1 coat of number one cement primer after thinning with water in the ratio of 1 : 0. 5 by volume. For better performance number one paints cement primer is recommended.

finishingapply 2 coats of number one premium emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.
ease of application
health. Safety and environmental securitystore in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed. Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label. Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; refer to special instructions/safety data sheet.